Difference between revisions of "DUNE LAr Software Releases"

From DUNE
Jump to navigation Jump to search
Line 106: Line 106:
 
DUNE:
 
DUNE:
 
* [https://cdcvs.fnal.gov/redmine/projects/lbnecode/repository/revisions/develop/show/lbne Redmine code browser]
 
* [https://cdcvs.fnal.gov/redmine/projects/lbnecode/repository/revisions/develop/show/lbne Redmine code browser]
* [http://scisoft.fnal.gov/scisoft/bundles/dunetpc SciSoft dunetpc bundles]
+
* [http://scisoft.fnal.gov/scisoft/bundles/dune SciSoft dune bundles]
 
* Units are cm and ns (Tom, January 2015).
 
* Units are cm and ns (Tom, January 2015).
 
* [http://lbne2-docdb.fnal.gov:8080/cgi-bin/RetrieveFile?docid=10280&filename=projectpy.pdf LBNE/DUNE job submission (talk by Tingjjun)]
 
* [http://lbne2-docdb.fnal.gov:8080/cgi-bin/RetrieveFile?docid=10280&filename=projectpy.pdf LBNE/DUNE job submission (talk by Tingjjun)]

Revision as of 12:13, 24 September 2015

Introduction

This page describes recent releases of DUNE software for simulation and reconstruction of event data from the LAr TPCs and associated photon and muon detectors. The software is released in the dunetpc package. Earlier releases in the lbnecode package are described on this other page.

Finding and downloading DUNE releases

Releases of dunetpc (and other DUNE products) are installed at FNAL at

/grid/fermiapp/products/dune

and on CVMFS at

/cvmfs/dune.opensciencegrid.org/products/dune

A release and all its dependencies may be installed on any machine using the pullProducts command:

./pullProducts ~/ups slf6 dune-v04_21_00 e7 prof

The first three arguments are the directory where the products are to be installed, the OS specifier and the product name and version. The last two are the UPS qualifiers. The last is the compiler option (prof is nearly optimized but retains the code line numbers) and the first is a colon-separated list of all other qualifiers (e.g. e7:s15, not e7-s15). The available OS and qualifiers for a given release may be deduced from the list of manifests found in the manifest directory for the desired dune release in the dune bundle listing.

The above command will copy many tar files to the current directory and sot it is best to run it in a dedicated directory and not in the product installation area. E.g. something like:

mkdir ~/upstars
cd ~/upstars
wget http://scisoft.fnal.gov/scisoft/bundles/tools/pullProducts
chmod +x ./pullProducts
./pullProducts ~/ups slf6 dune-v04_21_00 e7 prof

Tar files for individual product versions (including dunetpc) may also be downloaded directly from the SciSoft product area. To install a product, simply untar these in the local products area, e.g.

cd ~/ups
tar xf ~/Downloads/lbnecode-04.20.00-slf6-x86_64-e7-prof.tar.bz2

Using DUNE releases

Scripts to set up the FNAL and CVMFS releases are provided. To set up to use release 4.21 from the FNAL installation:

source /grid/fermiapp/products/dune/setup_dune.sh
setup dunetpc v04_21_00 -q e7:prof

To use the CVMFS installation of the same release:

source /cvmfs/dune.opensciencegrid.org/products/dune/setup_dune.sh
setup dunetpc v04_21_00 -q e7:prof

For local installation of all products in ~/ups, set up with something like the following:

source ~/ups/setups
setup git
setup gitflow
setup mrb
setup dunetpc v04_21_00 -q e7:prof

In all cases, the ups command can be used to find out which versions of dunetpc are available:

fnal:lbne> ups list -aK+ dunetpc 
"dunetpc" "v04_20_00" "Linux64bit+2.6-2.12" "e7:prof" "" 
"dunetpc" "v04_20_00" "Linux64bit+2.6-2.12" "debug:e7" "" 
"dunetpc" "v04_21_00" "Linux64bit+2.6-2.12" "e7:prof" "" 
"dunetpc" "v04_21_00" "Linux64bit+2.6-2.12" "debug:e7" ""

Building and installing dune releases

Build and installation instruction may be found on the Redmine CVMFS page. In particular, this page has the instructions for synchronizing the CVMFS releases with those in the FNAL grid area.

The code I (D. Adams) use to build releases is dune-larrel. See README.md in that package or use "larrel -H" for instructions. The product of the build is a tar file and manifest for each dune release combination of OS, version, qualifier, etc.

To install in FNAL grid area:

ssh dune@lbnegpvm03.fnal.gov
cd /grid/fermiapp/products/dune
tar xf /afs/fnal.gov/files/home/room1/dladams/reltars/dunecode-04.20.00-slf6-x86_64-e7-prof.tar.bz2

To synchronize the CVMFS area with the grid area:

ssh -l cvmfsdune oasiscfs02.fnal.gov
dune-sync dune/dunetpc

Replace dunetpc with dune_pardata, duneutil or lbne_raw_data to update any of those products. The script dune-sync is installed on the oasis server and may also be found at https://github.com/dladams/dune-larrel/blob/master/dune-sync.

Each synchronization generates a log in $HOME/logs and a CVMFS server tag. Periodically remove these. The tags may be listed with

cvmfs_server tag dune.opensciencegrid.org

and tags removed with

cvmfs_server tag -r TAG dune.opensciencegrid.org

To copy a tar file to SciSoft and install the corresponding manifest:

 copyToSciSoft /afs/fnal.gov/files/home/room1/dladams/reltars/dunecode-04.20.00-slf6-x86_64-e6-prof.tar.bz2
 copyToSciSoft workdir/manifests/dune-04.21.00-Linux64bit+2.6-2.12-e7-prof_MANIFEST.txt

The command script may be found at /afs/fnal.gov/files/home/room1/dladams/bin/copyToSciSoft or http://scisoft.fnal.gov/scisoft/bundles/tools/copyToSciSoft. In case of error, log in to scisoftportal.fnal.gov and (very carefully) remove invalid files from /nasroot/SciSoft/bundles/....

More information

DUNE:

LArSoft:

Art:

Building:

FHICL wiki.

Release building:

LBNE 35-ton Data Model and Reconstruction

DUNE and LarSoft geometry

LBNE code repositories and their browsers

LBNE jobs may be submitted using the package lbneutil described in a talk by Tingjun.

LBNE geometries are summarized here.

The reconstruction used in the 35-ton simulation is specified in lbnecode/source/fcl/lbne35t/reco/standard_reco_lbne35t.fcl.

The 35-ton MC data samples are described here.

GENIE event generator


LbTupler