Installation and Integration

Integration and Installation

Far Detector Integration

The interface between the Conventional Facilities and the cryogenic/cryostat with the Far Detector are a major component of the integration group for DUNE.

Key Documents

• 100% Preliminary design for Buildings and Site Infrastructure and Excavation from Arup USA
  • BSI Preliminary Design Report (2015-08-24_BSI-100 Percent PDR.pdf, 12.6 MB)
  • BSI Surface Design Drawings (Surface Binder.pdf, 16.0 MB)
  • BSI Underground Drawings (Underground Binder.pdf, 34.2 MB)
  • EXC Drawings (Excavation Drawings.pdf, 30.8 MB)
  • EXC Preliminary Design Report (EXC_100_PDR Issue 0.pdf, 76.9 MB)
• LBNF BSI Pre-Excavation 60% Final Design Submission
• Comprehensive Logistics Plan
• LBNF EXC Pre-Excavation 60% Final Design Submission
• LBNF BSI Pre-Excavation 90% Final Design Submission
• LBNF EXC Pre-Excavation 90% Final Design Submission
• LBNF EXC Pre-Excavation 100% Final Design reports
• LBNF EXC Pre-Excavation 100% Final Design Drawings

Logistics

The general plan for how materials will be transported to and within SURF is found in the SURF Logistics Assumptions document.

• SURF Logistics Assumptions document
• Shipping manual
• Cage Envelopes

Key documents and events related to the SURF logistics are:

• Comprehensive Logistics Plan
• Logistics Planning Workshop August 11-15 2015
  • Far Detector presentation and logistics equipment transport spreadsheet

CUC DATA and Control room

• Control Room Workshop Report

Ross/Yates Shaft Hoisting

The basic information related to hoisting is summarized in DOCDB 328 Far Site Shaft Hoisting Assumptions and Parameters.

Reference documents in DOCDB 328:

• Draft set of requirements for a new cage
  • Ross Cage Conveyance Requirements.pdf, 70.8 kB
• Interface discussion presentation describing load delivery
  • Ross Shaft Logistics Overview.pptx, 1.7 MB
• List of Cryostat components and how to deliver through shaft
  • Analysis_of_CERN_Cryostat_Versus_Ross_Shaft_Limitation...xls, 77.0 kB

Underground facilities

The far site conventional facilities is using the information from the Drift Study for referencing the maximum size objects that need to be accommodated by the surf infrastructure.

• Drift Size Optimization Study

Interface Management

The interfaces between Conventional Facilities and the Far Detector are documented through a series of Interface Control Documents that are agreed upon by both LBNF and DUNE. The ICDs themselves generally only identify the interface and then refer to a separate key document to describe and define the interface.

LBNF Systems Engineering webpage for interface management

Interface Control Documents

• CF Far Site Surface <--> Far Detector Design
• CF Far Site Shafts and Drifts <--> Far Detector Design
• CF Far Site Caverns <--> Far Detector Design
• CF Far Site Surface <--> Far Detector Construction
• CF Far Site Shafts and Drifts <--> Far Detector Construction
• CF Far Site Caverns <--> Far Detector Construction

Single-Phase Far Detector Installation

Cryostat internal installation

Material Handling

Roof access is primarily necessary during electronics cabling and deployment of the FC panels. An areal platform will be used when work at heights is required. One possibility which was used quite successfully are the Palazzani Industrie platforms. Palazzani areal platforms

Data Sheet for a small platform (1m wide) areal lift

Miscellaneous

Underground Views

ENH1 Schedule

Navigation

Back to Working group page

Action items

Action item page

Relevant meetings minutes

Grounding and Shielding meeting